Drop-In Ice Cooled Cold Pans

Top is 18-gauge Stainless Steel. Glass filler is 9.5” high, over die-stamped drain opening fitted with chrome-plated wire strainer. Ice bin opening is die-stamped with raised edges and the liner is high-impact ABS plastic with polyurethane insulation. Holds 45 pounds of ice   

Model 204

Top is one piece 20-gauge stainless steel. Interior liner is 22-gauge stainless steel and is creased to 1.00” diameter drain.                        Unit has a sectional, removable perforated stainless steel false bottom and is provided with adapter bars to allow placement of 12" x 20" pans.  Units is supplied with 1" plastic drain to be installed by customer.  Exterior housing is 22-gauge galvanized steel.  Unit is insulated with high density closed cell polyurethane.

Optional Accessories & Modifications

• Custom sizes and styles
• Single or double service flip-up sneezeguards

MODEL

# OF 12"X20" PANS HELD

L

D

H

N8030

2

30.75"

26"

10.75"

26"

10.75"

N8056

4

56.25"

26"

10.75"

26"

10.75"

26"

10.75"

               Narrow Drop-In Ice Cooled Cold Pans

15.87"

9.50"

15.87"

9.50"

Drop-In Self-Contained Cold Pans

Arrow Restaurant Equipment

N8100B Series

Top is one-piece 20-gauge stainless steel. Interior liner is 22-gauge stainless steel and is creased to a 1.00” diameter drain. A stainless steel holding clip adjusts for pans recessed 2”, or 3” to accommodate 12” x 20” pans 4” or 6” deep supplied by others. Product temperatures of 33°F (1°C) to41°F (5°C) are maintained when 4” deep pans are recessed 3” at 86°F ambient room temperature, meeting NSF 7 requirements. Adapter bars are standard. 

Sides and bottom are wrapped with refrigeration lines and insulated with high-density closed-cell polyurethane. Exterior housing is 22-gauge galvanized steel.

Condensing unit is suspended below the cold pan on a 16-gauge steel frame and uses HFC-134a refrigerant. Temperature control has an ON/OFF position to shut down cold pan. Unit has an 8’ (2.4m) cord and NEMA 5-15P plug.

A stainless steel louver is provided for field installation; cutout dimension is 12” x 23.5”. A second opening at the rear of the cabinet should be provided at installation to allow for proper air circulation.

Optional Accessories & Modifications

• Custom sizes and styles 
• Single or double service flip-up sneezeguards
• Relocate compressor
• Mullion fan assembly
• Remote refrigeration (specify refrigerant)

MODEL

# OF 12"X20" PANS HELD

L

D

H

N8130B

2

30.75"

26"

10.75"

26"

10.75"

N8156B

4

56.25"

26"

10.75"

26"

10.75"

26"

10.75"

Top is one piece, 18-gauge Stainless Steel. Top has a drain trough and 2" overhang around perimeter. Top is elevated 1" above counter surface. Underside of frost top is sealed with refrigeration lines and insulated with high density, closed cell polyurethane. Exterior housing is 22 gauge galvanized steel.      

Condensing unit is suspended below the frost top on a 16 gauge steel frame. Condensing unit uses HFC-404a refrigerant. Unit has an ON/OFF toggle switch, an 8’ cord and NEMA 5-15 plug. Unit has 1 stainless steel louver provided for field installation.  

Optional Accessories & Modifications

• Relocate compressor
• Single or double service flip-up sneezeguards

MODEL

L

D

H (TOP)

N8231

31.75"

25.87"

1"

25.87"

1"

N8259

59.50"

25.87"

1"

25.87"

1"

25.87"

1"

Drop-In Self-Contained Electric Hot & Cold Pans 

Arrow Restaurant Equipment

• NSF-4 and NSF-7 certified for hot and cold operation

• Stainless steel immersion heaters with stainless steel perforated covers

•  Remote control panel with 3-way hot/cold/off power switch and thermostat for hot operation

• Thermostat for cold operation located next to condensing unit

• Adjustable pan support for flush mounted hot operation or 2” recessed cold operation

• 1’’ stainless steel drain with screen

•  Stainless steel louver provided

• High density polyurethane foam throughout

• Push-in flange gasket is standard

• Adaptor bars for 12”x20” pans provided

• Environmentally friendly HFC-404A refrigerant

MODEL

# OF 12"X20" PANS HELD

L

D

H

N8630

2

30.75"

26"

12.56"

26"

12.56"

N8656

4

56.25"

26"

12.56"

26"

12.56"

26"

12.56"