Home > More Categories! > Warewashing
Choose a sub category:
Dish Racks, Dollies Disposals, Disposers, Waste Drains Faucets, Assemblies
Flatware Washing, Storage Glass Washers, Racks etc. Misc Warewashing
Pre Rinse, Spray Units Sinks, Dishtables Warewashers, General
Water, Booster Heaters
Warewashing, Sinks
Sort By:
Page of 13
BR258184 BR258167 GW-40
Camrack® Base Rack, full size, 1 compartment, 19-3/4" x 19-3/4", 3-1/4" inside & stack height, beige, NSF Camrack® Base Rack, full size, 1 compartment, 19-3/4" x 19-3/4", 3-1/4" inside & stack height, brown, NSF BarMaster Glasswasher, automatic, chemical sanitizing, (40) 20" x 20" racks per hour, auto fill, wash, drain & rinse cycles, electromechanical controls, multiple cycles, EZ-Clean™ wash & rinse arms, door safety switch, side panels, stainless steel frame, legs & adjustable bullet feet, 1 HP wash motor, NSF, ETL
CDTR-30-16/4 RL-30 1B18244-1D18R
(RL-30) Dishwasher - Insinger
List Price: $5,460.00
ea.
(1B18244-1D18R) Sink - John Boos
List Price: $1,122.00
ea.
Clean Dishtable, straight design, 30"W x 30"D x 43-1/2"H, left-to-right operation, 16/430 stainless steel top, 8"H backsplash, raised rolled edges on front & side, galvanized steel legs & crossbracing, adjustable metal feet, NSF Dishwasher, undercounter, 23"W x 25"D x 31-7/8"H, 3.5kw built-in booster, approximately 30 racks/hour cap., auto fill, 2.8kw tank heater, pumped drain, continuous wash cycle, (1) plate & (1) flat rack, stainless steel interior & exterior, TempGuard™ final rinse temp control, thermostatic controls, 1 HP wash motor, ENERGY STAR® Sink, (1) 18"W x 24" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
2B18244-1D18R 2B184-1D18L 2B184-1D18R
"B" Series Sink, 2-compartment, 58"W x 29-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 24" front-to-back x 14" deep bowls, (1) 18" drainboard on right, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA "B" Series Sink, 2-compartment, 58"W x 23-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 18" front-to-back x 14" deep bowls, (1) 18" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA "B" Series Sink, 2-compartment, 58"W x 23-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 18" front-to-back x 14" deep bowls, (1) 18" drainboard on right, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA
2B184-2D18 2B244-1D24L 2B244-2D24
"B" Series Sink, 2-compartment, 75"W x 23-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 18" front-to-back x 14" deep bowls, (2) 18" drainboards, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA "B" Series Sink, 2-compartment, 76"W x 29-1/2"D, 16/300 stainless steel construction, 24" side-to-side x 24" front-to-back x 14" deep bowls, (1) 24" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA "B" Series Sink, 2-compartment, 99"W x 29-1/2"D, 16/300 stainless steel construction, 24" side-to-side x 24" front-to-back x 14" deep bowls, (2) 24" drainboards, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA
3B18244-1D18R 3B18244-2D18 3B184-1D18L
(3B18244-1D18R) Sink - John Boos
List Price: $2,489.00
ea.
(3B18244-2D18) Sink - John Boos
List Price: $2,577.00
ea.
(3B184-1D18L) Sink - John Boos
List Price: $2,120.00
ea.
Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
3B184-1D18R 3B184-2D18 3B244-1D24L
(3B184-1D18R) Sink - John Boos
List Price: $2,120.00
ea.
(3B184-2D18) Sink - John Boos
List Price: $2,211.00
ea.
(3B244-1D24L) Sink - John Boos
List Price: $3,016.00
ea.
Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
3B244-2D24 E1S8-1620-12L18 E1S8-18-12L18
(3B244-2D24) Sink - John Boos
List Price: $3,126.00
ea.
Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E1S8-18-12R18 E1S8-24-14 E1S8-24-14R24
E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (1) 24"W x 24" front-to-back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (1) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E2S8-1620-12L18 E2S8-18-12L18 HS-1515
E-Series Compartment Sink, (2) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF Drop-In Hand Sink, one compartment, 15"W x 15"D x 5-1/8"H O.A., 12" wide x 10" front-to-back x 5-1/8" deep compartment, 4" O.C. deck mount faucet gooseneck with gooseneck spout (low lead compliant), 1-1/2" drain, stainless steel construction, NSF (14-3/8"W x 14-3/8"D cut-out required)
HS-7 CDTR-24-16/4 CDTR-60-16/4
(HS-7) Hand Sink - Krowne Metal
List Price: $601.00
ea.
Hand Sink, wall mount, 16"W x 15"D x 29"H O.A., 14" wide x 10" front-to-back x 6" deep bowl, 4" O.C. splash mount faucet with swing spout (low lead compliant), soap & towel dispenser, stainless steel side support brackets, P-trap, includes mounting bracket, stainless steel construction, NSF Clean Dishtable, straight design, 24"W x 30"D x 43-1/2"H, left-to-right operation, 16/430 stainless steel top, 8"H backsplash, raised rolled edges on front & side, galvanized steel legs & crossbracing, adjustable metal feet, NSF Clean Dishtable, straight design, 60"W x 30"D x 43-1/2"H, left-to-right operation, 16/430 stainless steel top, 8"H backsplash, raised rolled edges on front & side, galvanized steel legs & crossbracing, adjustable metal feet, NSF